# Bass Boost for Chrome — Deeper Low-End Audio

> Add bass to any Chrome tab with the one-tap Bass Boost EQ preset or the equalizer's low bands. Saved per site. Works on music, video, and podcasts.

- Canonical: https://www.superchargebrowser.com/features/bass-boost/
- Extension: audio
- Published: 2026-05-28
- Updated: 2026-05-28
- Source: SuperchargeBrowser (https://www.superchargebrowser.com)

Some headphones and laptop speakers roll off low frequencies noticeably. Other content is simply mastered thin. SuperchargeAudio adds low-end weight through its 10-band equalizer — either with the one-tap **Bass Boost preset** or by raising the low bands yourself.

There is no separate "bass knob" to learn. Bass lives in the same equalizer that shapes the rest of the sound, so a boost stacks cleanly with any other curve and saves per site like everything else.

## Two Ways to Add Bass

| Method | Speed | Best For |
|--------|-------|----------|
| Bass Boost preset | One tap | A quick, ready-made low-end lift |
| Manual low bands (32 / 64 / 125 Hz) | Hands-on | Precise, surgical shaping |

Pick the preset when you just want more weight now. Reach for the bands when a specific frequency needs attention — a boomy 125 Hz to tame, or sub-bass at 32 Hz to bring up.

## The Bass Boost Preset

Selecting **Bass Boost** from the preset list applies a low-shelf-weighted curve: a strong lift at the bottom that tapers off through the mids, with a slight trim up top so the low end stays the focus. It is one of ten built-in presets, alongside Vocal/Voice, Treble, Loudness, Rock, Pop, Electronic, Acoustic, Small Speakers, and Flat.

Applied in real time, the change is audible the instant you select it. Choose Flat to return to unprocessed audio.

## Manual Low-End with the Equalizer

The [equalizer](/features/equalizer/) exposes three bands in the bass region — 32 Hz, 64 Hz, and 125 Hz — each adjustable up to ±12 dB. The 32 Hz band is a low shelf, so it lifts everything beneath it; 64 and 125 Hz are peaking bands for targeted shaping.

A common starting point: +6 dB at 64 Hz for punch, a smaller lift at 32 Hz for sub weight, and 125 Hz left flat to avoid muddiness. Save the curve and it sticks to that site.

## Combining with Volume Boost

Bass shaping and [volume boost](/features/volume-boost/) sit at different stages of the chain, so they layer without interfering. For quiet, thin-sounding content:

1. Use [volume boost](/features/volume-boost/) to raise the overall level
2. Apply the Bass Boost preset for low-end weight
3. Fine-tune individual bands if anything sounds off

## Privacy

All processing is local — no audio leaves your browser. Your per-site EQ settings are stored in extension storage on your device. No account, no telemetry, nothing transmitted.

Questions? support@superchargebrowser.com

---

Canonical URL: https://www.superchargebrowser.com/features/bass-boost/